Fill out my online form.
SKYROVER optics launched a new 1x flat field mirror in 2021. The front end of the flat field mirror is connected with the telescope with m63x1 thread, which has higher coaxiality and rigidity than the plug-in type, and the end is m48x0 75 thread (the default rear intercept is 55mm), which can meet the use of full frame.
The end of the new flat field mirror is equipped with m48x0 75 built-in thread, which can be used to install the filter (please see the installation diagram in the following detail page)
Considering the extensive use of frozen CCD and off-axis star guide, the flat field mirror can remove the sleeve and use the flat field mirror part alone, so that it can have a longer working distance to meet the needs of filter wheel, off-axis guide and CCD.
The rear intercept is 55mm
Filter installation
① 、Remove the adapter ring at the tail (built-in m48x0.75 thread)
② 、Install filter
③ 、Screw the adapter ring with filter into the flat field mirror
*When a built-in 2-inch filter is installed, the full frame camera may have a slight dark angle
① 、1x defocus flat field mirror
② 、Filter
③、Adapter ring (built-in m48x0.75 thread)
④、SLR bayonet (M48 t-ring)
⑤ 、SLR camera
⑥、Freezing camera connecting ring
⑦、Freezing camera
Including OAG
①、1x defocus flat field mirror
②、Filter
③、Adapter ring (built-in m48x0.75 thread)
④、 M48 adapter ring
⑤、OAG
⑥、 Filter wheel
⑦、Freezing camera
Product picture