introduction
XC609T lathe CNC system is a new-generation CNC lathe CNC system developed by our company. Adopt international standard G code programming, full screen editing program, Chinese and English operation interface.The operation of the system is simple and intuitive. It can complete the processing of outer circle, end face, groove, taper, arc, thread, tapping, deep hole drilling, etc. through programming. Input and output port expansion and other functions have a very high cost performance.
XC609T CNC system software and hardware features:
★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, the maximum GAO speed is 12 meters / minute.★ 3.5-inch color widescreen LCD, resolution 480X320, Windows interface style. Equipped with 5 soft function keys, easy to learn and operate. Provides rich display interfaces such as parameter classification, alarm log, and system diagnosis, which facilitates debugging and maintenance.★ International standard G instruction.★ Full-screen editing of part programs, built-in 256M massive program space, can store 200 part programs.★ With USB interface, support U disk file reading and writing, data backup and U disk direct processing (DNC).★ Input 24 (expandable to 96) points, output 24 (expandable to 96) points (custom), flexible and convenient.★ Chinese / English operation interface, complete help information, more convenient operation.★ Supports multi-level operation permissions, convenient equipment management, and a time-limited system lock function.Technical specifications
Group this function can | |
Number of controlled axes | 2 axes ( X , Z) |
Number of linkage axes | Full linkage |
Analog spindle | 2 way |
Spindle override | 50% ~ 120% |
The most XIAO instruction unit | 0.001 mm |
Maximum DA instruction value | ± 99999999 × the most XIAO instruction unit |
Rapid feed rate | 12000 mm / min |
Rapid feed rate | F0, 25%, 50%, 100% |
Cutting feed rate | 12000 mm / min |
Feed speed override | 10% to 150% |
Electronic gear ratio | 1 to 65535: 1 to 65535 |
Automatic acceleration and deceleration | Have |
Positioning | G00 ( Linear interpolation can be performed) |
Imputation | Straight line ( G01) , circular arc ( G02 / G03 / G05) |
Return to reference point | Automatic reference position return ( G28) |
LCD | 3.5 -inch TFT LCD screen, resolution 480X320 |
MDI software key | 5 Ge |
Single step feed | x1 , x10 , x100 |
Communication Interface | U disk interface |
External handwheel interface | Have |
I / O interface | 24/24 ( expandable to 96/96) |
Pause (seconds) | Have |
Exact stop status | Have |
Exact stop | Have |
Storage trip check | Have |
MDI operation | Yes, support multi-stage operation |
Reset | Have |
Selective stop switch | Have |
Single-stage operation | Have |
Program protection switch | Have |
Self-diagnostic function | Have |
Emergency stop | Have |
power supply | DC24V |
Coordinate System | G50 set coordinates |
Automatic coordinate system setting | Have |
Decimal point input | Have |
Auxiliary assist function can | |
Auxiliary function | M2 bits, M custom code, manual / MDI / automatic mode controls the spindle forward, reverse, stop stop; controlling start and stop the coolant. |
Primary shaft function can | |
Spindle function | Analog spindle , dual spindle |
Edited editing operation for | |
Editing function | Parameter, diagnostic bit input, program editing, MDImulti-block execution |
storage | 256M |
Stored programs | 200 Ge |
Program name display | Chinese, English, numbers, combinations |
Program line search | Have |
Skip optional block | Have |
Program switch | Have |
display | |
display | Chinese English |
Display of processing time and number of parts | Have |
Spindle speed, M / Scommand | Have |
Description:- The CNC 4/6 Axis handheld controller MPG Pendant with x1,x10,x100 selectable.You are bidding one complete unit of the MPG pendant with Emergency stop for 4/6 axis CNC machine,it equipped with our popular machined MPG unit with 4 axis and scale selector,LED indicator also send feedback from the CNC machine to user about the status of the unit.Features:- x1,x10,x100 switch- X,Y,Z,4th axis selector switch- LED indicator- With Emergency stop- High quality professional chassis- 6ft extendable high quality shielded cable cord- Magnetic base holder can place anywhere on the machine steel surface- Required 5V+,150mA,power for MPG- Phase output is A,/A and B,/B;- TTL output, drive capability +-20mA;Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series,Higerman,HANUC,GSK,opened NC,KND,Siemens,the NUM,Spain FAGOR (NEW, 8055I) and so on.Wiring:User can wire this unit to the CNC system with easy.Package Content:- 1 x CNC MPG Pendant With Emergency stop
