IndusMart

2000T-3 three axis lathe numerical control system

The company is specialized for the domestic small and medium-sized machine tool manufacturers independent research and development of cost-effective numerical control system.

Using high-performance ARM CPU and large scale programmable device FPGA, real-time multi-task control and hardware interpolation technology, ensure the high efficiency of μm precision machining system.

8 inch color display screen, English and Chinese interface can be selected by parameter.

The 2000T-3 system can control 3 feed axes (including C axis), 2 simulation spindles, 1ms high speed interpolation, 1μm control accuracy, significantly improve the efficiency of parts processing, precision and surface quality.

3000T-3 three axis lathe numerical control system

The company is specialized for the domestic small and medium-sized machine tool manufacturers independent research and development of cost-effective numerical control system.

Using high-performance ARM CPU and large scale programmable device FPGA, real-time multi-task control and hardware interpolation technology, ensure the high efficiency of μm precision machining system.

10.4 inch color display, English and Chinese interface can be selected by parameter.

3000T-3 system can control 3 feed axes (including C axis), 2 simulation spindles, 1ms high speed interpolation, 1μm control accuracy, significantly improve the efficiency of parts processing, precision and surface quality.

2000M-3 three axis milling machine numerical control system

The CNC system of the milling machine machining center is a popular CNC system independently developed by the company, which is suitable for milling machines, drilling and milling machines, grinding machines, etc.

The system uses 32-bit high performance CPU and large scale programmable device FPGA, real-time control and hardware interpolation technology to ensure the high efficiency of the system under the μm level accuracy, and the editable PLC makes the logic control function more flexible and powerful.

8 inch color display screen, 800×480 resolution, English and Chinese interface can be selected by parameter.

2000M-3 system can control 3 feed shafts, 2 simulation spindles, 1ms high-speed interpolation, 0.1μm control accuracy, significantly improve the efficiency of parts processing, precision and surface quality.

3000M-3 three axis milling machine numerical control system

The CNC system of the milling machine machining center is a popular CNC system independently developed by the company, which is suitable for milling machines, drilling and milling machines, grinding machines, etc.

The system uses 32-bit high performance CPU and large scale programmable device FPGA, real-time control and hardware interpolation technology to ensure the high efficiency of the system under the μm level accuracy, and the editable PLC makes the logic control function more flexible and powerful.

10.4-inch color display, 800×600 resolution, English and Chinese interface can be selected by parameter.

3000M-3 system can control 3 feed shafts, 2 simulation spindles, 1ms high-speed interpolation, 0.1μm control accuracy, significantly improve the efficiency of parts processing, precision and surface quality.

Number of control Axis

Number of control axes: 3 Axis (X, Y, Z)

Number of linkage axles: 3 Axis

Feed axis function

Position command range:

Metric input (G21): -9999.9999mm ～ 9999.9999mm, minimum command unit: 0.0001mm

English input (G20): -999.9999inch ～ 999.9999inch, minimum command unit: 0.0001inch

Electronic gear: command frequency multiplication coefficient 1 ~ 65536,

Command frequency division coefficient 1 ~ 65536

Fast moving speed: up to 60m/min

Fast magnification: F0, 25%, 50% and 100% four levels of real-time adjustment

Cutting feed speed: maximum 15m/min (G94) or 500.00mm/r (G95)

Feed rate: 0 ~ 150% 16 level real-time adjustment

Manual feed rate: 0 ~ 150% 16 level real-time adjustment

Hand wheel feed: four gears: 0.001mm, 0.01mm, 0.1mm and 1mm

Single step feeding: four gears: 0.001mm, 0.01mm, 0.1mm and 1mm

Interpolation method: linear interpolation, circular interpolation, spiral interpolation and rigid tapping

Automatic chamfer function

Spindle function

2 channels of 0 ~ 10V analog voltage output, supporting dual spindle control

Spindle encoder: the number of encoder lines can be set (100 p/r ~ 5000 p/r)

Transmission ratio between encoder and spindle: (1 ~ 255): (1 ~ 255)

Spindle magnification: 50% ~ 120%, a total of 8 levels of real-time repair and adjustment

Constant linear speed control of main shaft

Tapping cycle, rigid tapping

Tool function

Tool length compensation

Tip radius compensation (type C)

Accuracy compensation

Pitch error compensation: the number of compensation points, compensation interval and compensation origin can be set

Reverse clearance compensation: it can be set to compensate the reverse clearance of the machine tool in the way of fixed frequency or lifting speed

PLC functions

Two level PLC program with processing speed of 1.5 μ S/ step basic instruction; 4700 steps at most, 8ms for level 1 program cycle

Support PLC warning and PLC alarm

support multiple PLC programs (up to 20), and the currently running PLC programs can be selected

Number of instructions: 45 (including 10 basic instructions and 35 functional instructions)

i/o unit input / output: 52/52

interface

10.4 inch widescreen LCD with a resolution of 800 × six hundred

Display in Chinese, English and other languages

2D tool path display

Real time clock

Operation management

Operation mode: edit, automatic, input, machine tool zero return, hand wheel / single step,

manual, DNC

Multi level operation authority management

Alarm log

Program editing

Program capacity: 56 MB, can store up to 400 programs

(including subroutines and macro programs)

Editing function: program / program segment / word retrieval, modification, deletion,

copy and paste

Program format: ISO code, support statement macro code programming, support relative coordinates, absolute coordinates, polar coordinates programming

Program call: support macro program call with parameters and 4-level subroutine nesting

Communication function

RS232: bidirectional transmission of part programs, parameters and other files, supporting PLC program and system software serial port upgrade

USB: U-disk file operation, direct processing of U-disk files, support PLC program and system software U-disk upgrade

Support serial port DNC processing function and USB online processing function

Reliability and safety

function

Emergency stop

Hardware travel limit

Software travel check

Data backup and recovery